| 260TMP12 NSK THRUST CYLINDRICAL ROLLER BEARING | H:212 mm; J:290.00 mm; A:145.00 mm; Shaft Diameter d:2 3/4 in; A1:100 mm; N1:28 mm; Material :Cast Iron; Seal:TA616/ 2-3/4; H2:35.0 mm; Housing Mass:14 Kg; N:22 mm; End Cover2:EC519-616; Locating Rings (width x OD):SR170X14.5; Adapter Sleeve1:HE316; A3:201 mm; Jmin:285 mm; Housing:SNT 519-616; L:345.00 mm; H1:112.0 mm; Bearing:21316K; |
| 51256X NSK Thrust Ball Bearing | Oil Reference Speed:10000 rpm; Features:O.D. Groove; Clearance:C0 (Normal); C0r - Static Load Rating:35.3 kN; Grease Reference Speed:7200 rpm; Outside Ring Width B:27.000 mm; Outside Diameter D:110.000 mm; Bore Size d:50 mm; Weight:1.05 Kg; Cr - Dynamic Load Rating:57.5 kN; Radius Rs min:2.000 mm; |
| 51292 NSK Thrust Ball Bearing | Enclosure:Double Shield; da (min):19 mm; Configuration:Single Row; B:5 mm; Bore Type:Cylindrical Bore; Static Load Rating:1,570 N; D:26 mm; ra (max):0.3 mm; Fillet Radius/Chamfer:0.3 mm; Weight:0.008 kg; Dynamic Load Rating:2,630 N; d:17 mm; Factor fo:16.1; Limiting Speed - Grease:26,000 rpm; Radial Clearance:0.011 to 0.025 mm; Da (max):24 mm; |
| 130TMP12 NSK THRUST CYLINDRICAL ROLLER BEARING | Ab - Cage-Cone Frontface Clearance:0.06 in; G1 - Heat Generation Factor (Roller-Raceway):11.4; K - Factor8:1.69; a - Effective Center Location4:-0.27 in; C0 - Static Radial Rating:12400 lbf; Cg - Geometry Factor:0.0556; db - Cone Backface Backing Diameter:1.16 in; Aa - Cage-Cone Backface Clearance:0.01 in; da - Cone Frontface Backing Diameter:1.14 in; B - Cone Width:0.8750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:1910 lbf; |
| 190TMP93 NSK THRUST CYLINDRICAL ROLLER BEARING | Width B:450.000 mm; Type:RX-1; Chamfer rsmin:4.00 mm; Width C:450.000 mm; Number of Lubrication Holes:8; Inner-Ring Set:440ARXS2245; Backing Shaft Diameter ds:477.4 mm; Dynamic Load Rating C11:20200 kN; Lubrication Hole Diameter h:7.5 mm; DUR/DOR F/E:487.000 mm; Outer-Ring Set:487RXS2245; Lubrication Groove g:16.0 mm; Static Load Rating Co:9100 kN; O.D. D:620.000 mm; Angle of Chamfer r1smin:20ยบ; Weight:965.300 lb; |
| 170TMP12 NSK THRUST CYLINDRICAL ROLLER BEARING | Seal Type:High Temperature Pac; Ca - Axial Load Rating:1708.53 lbf; Series Type:Light Series; Maximum Speed:3310 rpm; Dimension P:0.6 in; Support Type:Round Flange; Note:This product line wa; Bearing Type:Split Cylindrical Re; Dimension N:7.563 in; Cor - Static Load Rating:36194 lbf; Dimension V:0.1 in; Dimension L:5.1 in; Dimension T:11.3 in; Bearing UPC:013992026064; Dimension R:9.5 in; Bearing - Housing - Seal UPC:013992069382; |
| 231/710CAKE4 NSK Spherical Roller Bearing | B - Cone Width:23.000 mm; D:85.000 mm; Cone Part Number:X32209; Db - Cup Backface Backing Diameter:75.95 mm; d:45.000 mm; db - Cone Backface Backing Diameter:54.10 mm; e - ISO Factor8:0.4; a - Effective Center Location3:-4.3 mm; Ab - Cage-Cone Frontface Clearance:3 mm; Cup Part Number:Y32209; Bearing Weight:0.6 Kg; Y - ISO Factor9:1.48; Cg - Geometry Factor:0.0809; Series:32209; C - Cup Width:19.000 mm; |
| 220TMP11 NSK THRUST CYLINDRICAL ROLLER BEARING | Da (max):211 mm; Radial Clearance:0.085 to 0.125 mm; Limiting Speed - Oil:3,200 rpm; Fillet Radius/Chamfer:3 mm; dd (min):149 mm; db (max):132 mm; D:225 mm; Enclosure:Open; Limiting Speed - Grease:2,600 rpm; ra (max):2.5 mm; r1:3 mm; Static Load Rating:385,000 N; Dynamic Load Rating:340,000 N; Inside Ring Outside Diameter:135 mm; db (min):119 mm; dc (min):137 mm; ra1 (max):2.5 mm; Configuration:Single Row; |