| 6 1595 04 Rollix Slewing Ring Bearings | Outer Diameter (mm):319,964; C:65,088 mm; D:319,964 mm; d:177,8 mm; Bore Diameter (mm):177,8; Width (mm):88,9; B:85,725 mm; T:88,9 mm; Bearing number:H239640/10; Size (mm):177.8x319.964x88.9; a:22,4 mm; |
| 75075A Franke Slewing Ring Bearings | B:19.337 mm; r - Cup Backface To Clear Radius2:0.00 mm; e - ISO Factor8:0.38; R - Cone Backface To Clear Radius1:0.760 mm; Design Units:Imperial; Db - Cup Backface Backing Diameter:55.88 mm; C - Cup Width:16.955 mm; D:69.012 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; C0 - Static Radial Rating:13900 lbf; Cg - Geometry Factor:0.0668; Ab - Cage-Cone Frontface Clearance:2.3 mm; G1 - Heat Generation Factor (Roller-Raceway):18; |
| 6 1790 09 Rollix Slewing Ring Bearings | Bore Diameter (mm):36,5125; Basic dynamic load rating (C):25,7 kN; f:1,65 mm; Thread (G) - 5/16-24UNF:5/1624UNF; D2:78,4 mm; Bearing number:ER207-23; D:72 mm; d:36,5125 mm; S2:6,5 mm; S1:25,4 mm; Width (mm):42,9; r min.:1,1 mm; Outer Diameter (mm):72; Basic static load rating (C0):15,4 kN; Weight:0,61 Kg; a:3,18 mm; S:17,5 mm; r1 min.:0,5 mm; C:5,5 mm; B:42,9 mm; |
| 73071L Franke Slewing Ring Bearings | Angle (α):25 °; Width (mm):10; Bearing number:5S-7907UADG/GNP42; Bore Diameter (mm):35; C:10 mm; Weight:0,073 Kg; d:35 mm; B:10 mm; Size (mm):35x55x10; D:55 mm; Outer Diameter (mm):55; |
| 7 1304 04 Rollix Slewing Ring Bearings | Dimension H2:52.8 in; Dimension H:24.488 in; Shipping Weight:7575 lb; Dimension M:16.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:19.5 in; Support Type:Eight-Bolt Plummer B; Dimension J1:50.0 in; Bearing Type:Split Cylindrical Re; Bolt Size:8 x M56; Seal Type:High Temperature Pac; Dimension K:9.5 in; Dimension J2:37.0 in; Ca - Axial Load Rating:78009 lbf; Dimension L:63.0 in; |
| 66159L Franke Slewing Ring Bearings | D1:252,2 mm; Weight:30,46 Kg; (Oil) Lubrication Speed:1800 r/min; Basic static load rating (C0):1243 kN; Outer Diameter (mm):290; (Grease) Lubrication Speed:1400 r/min; Calculation factor (Y0):2,24; Size (mm):140x290x80.0; d1:196 mm; Bore Diameter (mm):140; r5 min.:3 mm; B:80,0 mm; D:290 mm; L:119 mm; Width (mm):80,0; Calculation factor (Y1):2,29; b1:14 mm; d:140 mm; C:80,0 mm; Basic dynamic load rating (C):868 kN; |
| 6 1390 03 Rollix Slewing Ring Bearings | Preload class A GA:25 N; a:8.4 mm; r1,2 min.:0.3 mm; B:9 mm; Calculation factor fHC:1.04; Calculation factor f2B:1.07; d1:25.6 mm; Preload class B - GB:50 N; Calculation factor f0:9.8; Number of balls z:15; da max.:25.1 mm; Calculation factor - f:1; Ball - Dw:4.762 mm; Limiting speed for grease lubrication:53000 r/min; Preload class C GC:100 N; Size (mm):37x20x9; D:37 mm; Outer Diameter (mm):20; D2:34.15 mm; |
| 73095L Franke Slewing Ring Bearings | Bearing number:AST800 12050; Bearing Length, Nominal (B):50.000; Shaft Size (ds) - 120 +0 / -0.054:120 +0 / 0.054; Average Clearance (Cd):0.1850; Bearing Outside Diameter, Nominal(Do):125.000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; OD Chamfer Length (Co):1.800; ID Chamfer Length (Ci):0.600; Bearing Type:steel with bronze; ID Chamfer Angle (B deg.):45; Bore Diameter (mm):120; Housing Bore Dia. (Dh) - 125 +0.040 / -0:125 +0.040 / 0; |