| 75055A Franke Slewing Ring Bearings | D1 - Flange Outer Diameter:5.2772 in; Cage Type:Stamped Steel; d:2.3750 in; G1 - Heat Generation Factor (Roller-Raceway)10:83.2; Cg - Geometry Factor11:0.0827; Design Units:Imperial; R - Cone Backface To Clear Radius1:0.14 in; T1 - Bearing Width:1.750 in; a - Effective Center Location3:-0.37 in; Ab - Cage-Cone Frontface Clearance:0.08 in; e - ISO Factor8:0.49; C90 - Dynamic Radial Rating (90 million revolutions)4:14200 lbf; |
| 6 2242 Rollix Slewing Ring Bearings | Basic static load rating (C0):139 kN; Bore Diameter (mm):240; Bearing number:61848; (Grease) Lubrication Speed:1800 r/min; Basic dynamic load rating (C):108 kN; C:28 mm; B:28 mm; D:300 mm; Outer Diameter (mm):300; d:240 mm; Width (mm):28; Size (mm):240x300x28; |
| 25 0841 01 Rollix Slewing Ring Bearings | outside diameter:3.3465 in; bore diameter:0.3937 in; radial static load capacity:39500 N; Width (mm):30,000; overall width:1.1811 in; cage material:Steel; manufacturer upc number:4547359126310; C:30,000 mm; Bore Diameter (mm):30,000; closure type:Double Sealed; radial dynamic load capacity:22300 N; Outer Diameter (mm):47,000; Fw:30,000 mm; operating temperature range:-40 to 250 ºF &; D:47,000 mm; |
| 7 2810 09 Rollix Slewing Ring Bearings | Series:19000; da - Cone Frontface Backing Diameter:1.71 in; K - Factor7:1.31; T - Bearing Width across Cups:1.4491 in; Bearing Weight:1.3 lb; D:2.8125 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2250 lbf; Y2 - ISO Factor10:2.26; R - Cone Frontface To Clear Radius1:0.030 in; Cg - Geometry Factor11:0.0694; B - Double Cone Width:1.9370 in; r - Cup Backface To Clear Radius2:0.04 in; d:1.5 in; |
| 1 1895 Rollix Slewing Ring Bearings | Bearing UPC:013992026552; Bolt Size:2 x M24; Dimension L:410 mm; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:64745 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; Seal Type:High Temperature Pac; Dimension H2:265 mm; Shaft Size:3-15/16 in; Dimension M:120 mm; Note:This product line wa; Series Type:Light Series; Dimension H:125 mm; Support Type:Two-Bolt Plummer Blo; Maximum Speed:2340 rpm; |
| 75018A Franke Slewing Ring Bearings | Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Angle (B deg.):45; Bearing Outside Diameter, Nominal(Do):255.000; Shaft Dia., Nominal (d):250.0000; Outer Diameter (mm):255; Material:Wrapped bronze with; Bore Diameter (mm):250; Flange Radius (rfl):2.000; Shaft Size (ds) - 250 -0.170 / -0.216:250 0.170 / 0.216; Bearing number:ASTT90 F25060; Flange Thickness (Sfl):2.500; ID Chamfer Length (Ci):0.600; |
| 34 0741 01 Rollix Slewing Ring Bearings | a:18 mm; D3 max:33.17 mm; b max:1.65 mm; B:15,900 mm; Nlim:16,000 rpm; r0 max:0.4 mm; f:1.07 mm; Min operating temperature, Tmin:-20 °C; rNa max:0.6 mm; Size (mm):15x35x15.900; rs min:0.6 mm; Characteristic rolling element frequency, BSF:3.97 Hz; d1:21.1 mm; Db min:40.4 mm; Characteristic inner ring frequency, BPFI:4.87 Hz; Da max:31 mm; C:15,900 mm; D1:31.5 mm; Outer Diameter (mm):35,000; d:15,000 mm; |
| 23 0941 01 Rollix Slewing Ring Bearings | Fatigue load limit - Pu:68 kN; da max.:155 mm; Calculation factor e:0.2; Width (mm):53; D1:197 mm; r1,2 - min.:2 mm; K:4.5 mm; Calculation factor - Y1:3.4; Calculation factor - Y2:5; Calculation factor Y1:3.4; Inventory:0.0; da - min.:149 mm; Mass bearing:6.55 kg; Outer Diameter (mm):140; Da - max.:201 mm; Size (mm):210x140x53; r1,2 min.:2 mm; da min.:149 mm; D:210 mm; ra max.:2 mm; |