| 75070A Franke Slewing Ring Bearings | ra max.:0,6 mm; d:9 mm; cyl count:10; Bore Diameter (mm):9; Da max.:22 mm; groove inner:13.526; GRS rpm:26000; yobi:129; X1:1; r:0.6; SRI:2.08; Basic dynamic load rating (C):4,15 kN; X2:0.65; da min.:13 mm; CAng:11.938; groove outer:21.856; X0:1; cyl dia:3.969; hidYobi:129; Basic static load rating (C0):0,895 kN; |
| 28 0941 01 Rollix Slewing Ring Bearings | D:273,05 mm; Size (mm):203.2x273.05x34.925; Weight:6,5 Kg; Basic dynamic load rating (C):200 kN; B:34,925 mm; Bore Diameter (mm):203,2; Bearing number:80BIH359; d:203,2 mm; C:34,925 mm; Outer Diameter (mm):273,05; Width (mm):34,925; |
| 7 0946 05 Rollix Slewing Ring Bearings | Bore Diameter (mm):15; OD Chamfer Length (Co):2.000; ID Chamfer Angle (B deg.):15; Bearing Outside Diameter, Nominal(Do):21.000; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Bore after Mounting (di):15 +0.034 / +0.016; ID Chamfer Length (Ci):1.200; Bearing number:AST650 152125; Shaft Dia., Nominal (d):15.0000; Bearing Outside Diameter Tolerance (Do tol.):21 +0.021 / +0.008; |
| 66157L Franke Slewing Ring Bearings | Grease Limiting Speed:38000 rpm; Weight:0.0070 Kg; Features:Open; Radius Rs min:0.300 mm; Outside Diameter D:19.0000 mm; Cr - Dynamic Load Rating:2.3 kN; Outside Ring Width B:6.000 mm; Clearance:C3; Bore Size d:6 mm; Oil Limiting Speed:45000 rpm; C0r - Static Load Rating:0.89 kN; |
| 66150L Franke Slewing Ring Bearings | f2:0,7 mm; L:80 mm; f1:1,4 mm; Bore Diameter (mm):110; Outer Diameter (mm):115; D:115 mm; Bearing number:TUP2 110.80; θ:9,5 mm; d:110 mm; |
| 75075A Franke Slewing Ring Bearings | B:19.337 mm; r - Cup Backface To Clear Radius2:0.00 mm; e - ISO Factor8:0.38; R - Cone Backface To Clear Radius1:0.760 mm; Design Units:Imperial; Db - Cup Backface Backing Diameter:55.88 mm; C - Cup Width:16.955 mm; D:69.012 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; C0 - Static Radial Rating:13900 lbf; Cg - Geometry Factor:0.0668; Ab - Cage-Cone Frontface Clearance:2.3 mm; G1 - Heat Generation Factor (Roller-Raceway):18; |
| 73041L Franke Slewing Ring Bearings | Basic static load rating (C0):7,85 kN; Width (mm):17,4625; Bearing number:MJ3/4-2RS; B:17,4625 mm; Outer Diameter (mm):50,8; D:50,8 mm; C:17,4625 mm; Size (mm):19.05x50.8x17.4625; Bore Diameter (mm):19.05; Weight:0,156 Kg; Basic dynamic load rating (C):16,5 kN; d:19.05 mm; |
| 75034A Franke Slewing Ring Bearings | Bore Diameter (mm):240; Dynamic Load Rating (Cr):254,000; Max Speed (Oil) (X000 RPM):1; Radius (min) (rs):1.500; Bore Dia (d):240.0000; Static Load Rating (Cor):1,045,000; Outer Dia (D):300.0000; Max Speed (Grease) (X000 RPM):1; Bore Dia. Clearance (d1):243.0000; Outer Dia. Pilot (D1):297.0000; Weight (g):7,640.00; Bearing Type:with grooved raceway; Height (H):45.0000; Material:52100 chrome steel,; |