| 22 0841 01 Rollix Slewing Ring Bearings | Designation Ruville:7203; Designation FAG:713691010; Bearing number:CX080; Designation SNR:R172.03; Designation SKF:VKBA 1306; |
| 1 3031 Rollix Slewing Ring Bearings | Width (mm):10; Angle (α):20 °; Bearing number:7907UG/GNP42; Size (mm):35x55x10; Outer Diameter (mm):55; B:10 mm; Bore Diameter (mm):35; C:10 mm; D:55 mm; d:35 mm; |
| 7 0946 05 Rollix Slewing Ring Bearings | Bore Diameter (mm):15; OD Chamfer Length (Co):2.000; ID Chamfer Angle (B deg.):15; Bearing Outside Diameter, Nominal(Do):21.000; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Bore after Mounting (di):15 +0.034 / +0.016; ID Chamfer Length (Ci):1.200; Bearing number:AST650 152125; Shaft Dia., Nominal (d):15.0000; Bearing Outside Diameter Tolerance (Do tol.):21 +0.021 / +0.008; |
| 73046L Franke Slewing Ring Bearings | Bore Diameter (mm):25.400; Width:1 Inch | 25.4 Millim; Outside Diameter:1.25 Inch | 31.75 Mi; Fw:25.400 mm; Basic dynamic load rating (C):24.95 kN; Weight:0.035 Kg; Noun:Bearing; Basic static load rating (C0):43.41 kN; C0r:43.41; Inch - Metric:Inch; Enclosure:Open; Weight / LBS:0.077; Other Features:2 Rib Outer Ring | D; Mounting inner ring:IR-1216(1); Cu:6.75; Minimum Buy Quantity:N/A; Width (mm):25.40; |
| 1 0947 Rollix Slewing Ring Bearings | Bore Diameter (mm):31,75; Width (mm):39,52; Bearing number:W209PPB5; B:39,52 mm; C:30,175 mm; Be:30,175 mm; Bi:39,52 mm; D:85 mm; Size (mm):31.75x85x39.52; d:31,75 mm; Outer Diameter (mm):85; |
| 24 0741 01 Rollix Slewing Ring Bearings | Factor (K):1,11; Bore Diameter (mm):19.05; d:19.05 mm; a -:1,5 mm; Weight:0,07 Kg; Basic static load rating (C0):12,3 kN; Basic dynamic load rating (Ca90):2,9; Calculation factor (e):0,53; Da:37 mm; Bearing number:A6075/A6162; Db:34,5 mm; Aa:0,5 mm; Factor (Cg):0,0085; Factor (G2):5,6; Outer Diameter (mm):41,275; db:24 mm; T:11,905 mm; Size (mm):19.05x41.275x11.905; Factor (G1):2,9; Basic dynamic load rating (C1):12,4 kN; |
| 7 2810 09 Rollix Slewing Ring Bearings | Series:19000; da - Cone Frontface Backing Diameter:1.71 in; K - Factor7:1.31; T - Bearing Width across Cups:1.4491 in; Bearing Weight:1.3 lb; D:2.8125 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2250 lbf; Y2 - ISO Factor10:2.26; R - Cone Frontface To Clear Radius1:0.030 in; Cg - Geometry Factor11:0.0694; B - Double Cone Width:1.9370 in; r - Cup Backface To Clear Radius2:0.04 in; d:1.5 in; |
| 73016L Franke Slewing Ring Bearings | D:235 mm; Bore Diameter (mm):140; Bearing number:53328; d1:144 mm; Outer Diameter (mm):235; T:84,9 mm; D1:240 mm; d:140 mm; |