| 11.30.1734.001.41.1503 Standard 5 Slewing Ring Bearings | Initial grease fill:379.89 g; Labyrinth ring:2 x LOR 111; A1:120.65 mm; Pa:20.7 kN; Max. speed for PosiTrac Plus seal:1350 r/min; R1:79.375 mm; RG:1/2 NPT; H2:53.975 mm; PG:1/4 NPT; S:4.763 mm; H:257.175 mm; PosiTrac Plus contact element:2 x B10724-113; A2:190.5 mm; Cap bolt, SAE grade:8; Stabilizing ring:SR-24-20; h:46.831 mm; P60°:249 kN; Mass pillow block:64 kg; Cap bolt recommended tightening torque:298.3 N·m; |
| 92.40.2395.990.11.1502 Standard 5 Slewing Ring Bearings | A5:18 mm; J min.:100 mm; Basic dynamic load rating C:14 kN; A1:22 mm; N1:12.5 mm; J:105 mm; Recommended diameter for attachment bolts, mm G:10 mm; J max.:110 mm; L:134 mm; A:32 mm; Recommended diameter for attachment bolts, inch G:0.375 in; H2:16 mm; Fatigue load limit Pu:0.335 kN; s1:26.9 mm; Mass bearing unit:0.35 kg; H1:36.5 mm; Thread grub screw G2:M6x0.75; Basic static load rating C0:7.8 kN; H:71 mm; |
| 6 0475 22 Rollix Slewing Ring Bearings | D:47 mm; Basic static load rating C0:37.5 kN; da min.:23 mm; Fatigue load limit Pu:1.4 kN; H:25 mm; Static moment stiffness:80 N·m/mrad; b:4.2 mm; r1,2 min.:0.3 mm; d2:28.7 mm; K:3 mm; Preload:720 N; Mass bearing:0.24 kg; ra max.:0.3 mm; Static axial stiffnes:470 N/µm; rb max.:0.6 mm; D2:38.1 mm; Frictional moment:0.24 N·m; Attainable speed:4300 r/min; d:17 mm; r3,4 min.:0.6 mm; |
| 191.40.3550.990.41.1502 Standard 5 Slewing Ring Bearings | D:270.0000 mm; d:150.000 mm; Basic Dynamic Radial Load Rating C:216000 N; Fillet Radius rb:1.00 mm; B:45.00 mm; Basic Static Radial Load Rating Co:260000 N; Oil Speed Rating n2:2400 rpm; Grease Speed Rating n1:1700 rpm; Fillet Radius ra:2.50 mm; |
| 162.40.2240.891.41.1503 Standard 5 Slewing Ring Bearings | Coefficient of friction µ max.:0.15; Mass bushing:6.6 kg; d:110 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; B:200 mm; D:130 mm; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; α:124 °; a:10 mm; Specific dynamic load factor K:25 N/mm²; h:111.5 mm; Tolerance shaft:e7; |
| 12.50.3520.001.49.1502 Standard 5 Slewing Ring Bearings | Mass bushing:0.001 kg; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; d:4 mm; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; B:8 mm; Tolerance housing:H7; D:7 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ max.:0.1; |
| 2 0308 01 Rollix Slewing Ring Bearings | Basic dynamic load rating C:3470 kN; Basic static load rating C0:6700 kN; Mass bearing:211 kg; Limiting value e:0.3; s max.:7.2 mm; F:499 mm; Reference speed:800 r/min; r1,2 min.:6 mm; da min.:483 mm; Limiting speed:1300 r/min; Fatigue load limit Pu:520 kN; d:460 mm; Calculation factor kr:0.17; D:680 mm; B:163 mm; da max.:491 mm; db min.:504 mm; ra max.:5 mm; Da max.:657 mm; D1 ≈:616 mm; |
| 161.28.1700.891.21.1503 Standard 5 Slewing Ring Bearings | D:650 mm; B:250 mm; F:463 mm; b:16.7 mm; Calculation factor kr:0.34; da max.:456 mm; Mass bearing:325 kg; Basic dynamic load rating C:4730 kN; s max.:7.5 mm; r1,2 min.:6 mm; Reference speed:800 r/min; ra max.:5 mm; Design variant/feature:NNU K30/W33; D1 ≈:577 mm; K:9 mm; da min.:426 mm; Basic static load rating C0:9500 kN; Limiting speed:1000 r/min; Fatigue load limit Pu:750 kN; Da max.:624 mm; |