| 92.35.2012.990.11.1502 Standard 5 Slewing Ring Bearings | L:610 mm; P0°:2600 kN; J6:560 mm; Oil level, max.:75 mm; P180°:1300 kN; H:411 mm; da:180 mm; Oil level, min.:65 mm; Da:340 mm; J:510 mm; N4 max.:20 mm; Q150°:1040 kN; Cap bolt, size:M 24x160; A2:272 mm; N:42 mm; P55°:3200 kN; A1:230 mm; P150°:1000 kN; Eye bolt, size:2 x M 20; H2:85 mm; |
| 6 0508 Rollix Slewing Ring Bearings | G:Tr 560x6; d:560 mm; G3:12 mm; A:6 mm; B5:110 mm; B:85 mm; d1:530 mm; Mass adapter sleeve assembly:219 kg; G2:M 8; B1:462 mm; Hydraulic nut:HMV 112E; d3:710 mm; |
| 11.50.3567.001.49.1502 Standard 5 Slewing Ring Bearings | Calculation factor f2D:1.14; dn:103.3 mm; Basic dynamic load rating C:44.2 kN; B:18 mm; Calculation factor f1:0.98; Calculation factor (back-to-back, face-to-face) Y2:1.41; rb max.:0.6 mm; Db max.:121 mm; Preload class A GA:280 N; Calculation factor f2A:1; Calculation factor fHC:1; r1,2 min.:1.1 mm; Static axial stiffness, preload class D:536 N/µm; Reference grease quantity Gref:7.5 cm³; |
| 39 0541 01 Rollix Slewing Ring Bearings | Taconite seal:TER 120; P180°:92.5 kN; PG:1/4 NPT; J min.:492.125 mm; J max.:549.275 mm; A2:307.975 mm; Initial grease fill:878.85 g; Stabilizing ring:SR-0-28; Cap bolt recommended tightening torque:203.4 N·m; h:65.088 mm; P90°:140 kN; J1:107.95 mm; H1:179.375 mm; Cap bolt:4 x 3/4-10 UNC; ba:78.581 mm; P60°:234 kN; RG:3/4 NPT; P120°:85.9 kN; H2:69.85 mm; N1:28.575 mm; |
| 162.40.2128.890.11.1503 Standard 5 Slewing Ring Bearings | Insert Bearing IB:Stainless Steel; Dimension A1:39.0 mm; Weight W:0.87 kg; Shaft Diameter D:40 mm; Distance J:101.5 mm; Dimension DA:115.9 mm; Basic Dynamic Radial Load Rating C:24700 N; Diameter N:14.0 mm; Dimension L:130.0 mm; Dimension A2:17.0 mm; Basic Static Radial Load Rating Co:19000 N; Height T:52.4 mm; |
| 11.30.1734.001.41.1503 Standard 5 Slewing Ring Bearings | Initial grease fill:379.89 g; Labyrinth ring:2 x LOR 111; A1:120.65 mm; Pa:20.7 kN; Max. speed for PosiTrac Plus seal:1350 r/min; R1:79.375 mm; RG:1/2 NPT; H2:53.975 mm; PG:1/4 NPT; S:4.763 mm; H:257.175 mm; PosiTrac Plus contact element:2 x B10724-113; A2:190.5 mm; Cap bolt, SAE grade:8; Stabilizing ring:SR-24-20; h:46.831 mm; P60°:249 kN; Mass pillow block:64 kg; Cap bolt recommended tightening torque:298.3 N·m; |
| 12.50.2559.201.49.1502 Standard 5 Slewing Ring Bearings | Sealing solution:Triple-lip seals; C:36 mm; α:6 °; Mass plain bearing:1.1 kg; da max.:66.8 mm; Material constant KM:330; Da min.:79.7 mm; r2 min.:1 mm; ra max.:1 mm; M:4 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; d:60 mm; Da max.:84.2 mm; r1 min.:1 mm; Specific dynamic load factor K:100 N/mm²; rb max.:1 mm; Basic static load rating C0:1220 kN; Lubricant:Regular relubricatio; |
| 121.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Db2:95 mm; N4:4 mm; Db1:87 mm; d:35 mm; Basic dynamic load rating C:25.5 kN; Housing material:Cast iron; A5:22 mm; J6:106 mm; Basic static load rating C0:15.3 kN; Recommended diameter for attachment bolts, inch G:0.5 in; s1:32.3 mm; Limiting speed:1100 r/min; Thread grub screw G2:M10x1; T:53.3 mm; B1:51.1 mm; Da:106.4 mm; Recommended tightening torque for grub screw:16.5 N·m; A:34.5 mm; J7:29 mm; |