| 25 0541 01 Rollix Slewing Ring Bearings | Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating C:255000 N; Oil Speed Rating n2:3600 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:300000 N; Fillet Radius ra:2.50 mm; D:180.0000 mm; B:84.00 mm; d:70.000 mm; |
| 1 0342 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:12500 N; d:20.000 mm; B:24.00 mm; Fillet Radius ra:0.64 mm; Grease Speed Rating n1:14000 rpm; Basic Dynamic Radial Load Rating C:17400 N; Fillet Radius rb:0.30 mm; D:42.0000 mm; Oil Speed Rating n2:16000 rpm; |
| 92.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:600 kN; α:4 °; M:4 mm; b1:7.7 mm; Material constant KM:330; b:7.7 mm; Design (sliding contact surface combination):Steel/steel; Sealing solution:Triple-lip seals; d1 ≈:90 mm; rb max.:1 mm; r2 min.:1 mm; D:120 mm; Lubricant:Maintenance free &nd; Da min.:104.4 mm; Specific dynamic load factor K:150 N/mm²; r1 min.:0.6 mm; ra max.:0.6 mm; Mass plain bearing:2.5 kg; |
| 121.40.4750.990.41.1502 Standard 5 Slewing Ring Bearings | Hexagonal key size for grub screw N:3 mm; d:35 mm; Basic static load rating C0:15.3 kN; L:118 mm; A:35 mm; Mass bearing unit:0.69 kg; A1:17 mm; Db:90 mm; Da:106.4 mm; B1:39.5 mm; s1:24.3 mm; Basic dynamic load rating C:25.5 kN; Recommended tightening torque for grub screw:7.4 N·m; N:14.8 mm; Recommended diameter for attachment bolts, mm G:12 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 92.40.2395.991.41.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:42000 rpm; Fillet Radius ra:1.00 mm; B:15.00 mm; Fillet Radius rb:0.60 mm; d:25.000 mm; Basic Static Radial Load Rating Co:9650 N; Basic Dynamic Radial Load Rating C:15900 N; Grease Speed Rating n1:28000 rpm; D:52.0000 mm; |
| 12.40.3300.000.11.1502 Standard 5 Slewing Ring Bearings | H2:53.975 mm; Pa:20.7 kN; Initial grease fill:379.89 g; H1:133.35 mm; Eye bolt:2 x 3/8-16 UNC; Max. speed for PosiTrac Plus seal:1350 r/min; R2:30.163 mm; Cap bolt, SAE grade:8; L:419.1 mm; A2:190.5 mm; Housing:SSAFS 524; Da:215.001 mm; A1:120.65 mm; PG:1/4 NPT; Ca:67.793 mm; da:107.95 mm; P90°:149 kN; S:4.763 mm; R1:79.375 mm; h:46.831 mm; |
| 161.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | s1 max.:46.3 mm; D:830 mm; d2 ≈:600 mm; Mass bearing:695 kg; r1,2 min.:7.5 mm; Basic dynamic load rating C:9800 kN; Misalignment factor k1:0.115; D1 ≈:740 mm; d:500 mm; Da min.:721 mm; Basic static load rating C0:17600 kN; Fatigue load limit Pu:1160 kN; ra max.:6 mm; Limiting speed:560 r/min; Reference speed:430 r/min; Operating clearance factor k2:0.093; B:325 mm; Da max.:798 mm; Ca min.:5.9 mm; |
| 121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Rα:45 °; A3:3.2 mm; A1:11 mm; J6:61.5 mm; Fatigue load limit Pu:0.2 kN; Thread grub screw G2:#10-32 UNF; Db2:57 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; GN:1/4-28 SAE-LT; Recommended tightening torque for grub screw:4 N·m; T:32.9 mm; Recommended diameter for attachment bolts, inch G:0.375 in; N4:2 mm; Basic static load rating C0:4.75 kN; Basic dynamic load rating C:9.56 kN; |