| 11.40.2915.001.41.1502 Standard 5 Slewing Ring Bearings | Basic static load rating C0:10.6 kN; U:12 mm; Mass needle roller and cage assembly:0.0085 kg; Ew:20 mm; Fw:14 mm; Basic dynamic load rating C:9.9 kN; Limiting speed:28000 r/min; Reference speed:24000 r/min; Fatigue load limit Pu:1.25 kN; |
| 6 04 Rollix Slewing Ring Bearings | r1,2 min.:7.5 mm; Da min.:1405 mm; ra max.:6 mm; Operating clearance factor k2:0.097; da max.:1289 mm; Da max.:1512 mm; da min.:1208 mm; D1 ≈:1439 mm; D:1540 mm; Mass bearing:1400 kg; Basic static load rating C0:33500 kN; Reference speed:220 r/min; Fatigue load limit Pu:1800 kN; Ca min.:6.2 mm; d2 ≈:1291 mm; Limiting speed:300 r/min; s1 max.:19.6 mm; Basic dynamic load rating C:13400 kN; |
| 26 0411 01 Rollix Slewing Ring Bearings | P90°:180 kN; RG:3/4 NPT; Ca:86.614 mm; da:152.4 mm; Max. speed for Taconite seal:520 r/min; PG:1/4 NPT; H:298.45 mm; End plug (suffix Y):EPR 18; R1:87.313 mm; Taconite seal:TER 141; ba:64.294 mm; L:511.175 mm; A2:260.35 mm; Stabilizing ring:2 x SR-0-24; R2:38.1 mm; Da:259.999 mm; Mass pillow block:92 kg; Initial grease fill:481.95 g; P60°:301 kN; Eye bolt:2 x 3/8-16 UNC; |
| 12.50.2559.201.49.1502 Standard 5 Slewing Ring Bearings | Sealing solution:Triple-lip seals; C:36 mm; α:6 °; Mass plain bearing:1.1 kg; da max.:66.8 mm; Material constant KM:330; Da min.:79.7 mm; r2 min.:1 mm; ra max.:1 mm; M:4 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; d:60 mm; Da max.:84.2 mm; r1 min.:1 mm; Specific dynamic load factor K:100 N/mm²; rb max.:1 mm; Basic static load rating C0:1220 kN; Lubricant:Regular relubricatio; |
| 192.32.2500.990.41.1502 Standard 5 Slewing Ring Bearings | P150°:40.5 kN; Cap bolt recommended tightening torque:298.3 N·m; N1:22.225 mm; Da:160 mm; Mass pillow block:21.5 kg; R2:27.94 mm; H:192.088 mm; P60°:121 kN; H2:41.275 mm; PG:1/8 NPT; Cap bolt:2 x 5/8-11 UNC; h:42.862 mm; Pa:8.27 kN; ba:35.719 mm; A1:98.425 mm; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 7; P180°:49.8 kN; R1:60.325 mm; Initial grease fill:286.33 g; |
| 21 0411 01 Rollix Slewing Ring Bearings | Fatigue load limit Pu:880 kN; Design variant/feature:TQO/GWI; D1 ≈:397 mm; r3,4 min.:3.3 mm; D:447.675 mm; Comparative axial load rating CFa:193 kN; Basic dynamic load rating C:4400 kN; Calculation factor Y2:3; r1,2 min.:3.3 mm; Calculation factor Y1:2; Calculation factor Y0:2; Calculation factor e:0.33; d:317.5 mm; Thrust factor K:1.74; Basic static load rating C0:10800 kN; B:327.025 mm; Comparative radial load rating CF:1160 kN; |
| 121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Rα:45 °; A3:3.2 mm; A1:11 mm; J6:61.5 mm; Fatigue load limit Pu:0.2 kN; Thread grub screw G2:#10-32 UNF; Db2:57 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; GN:1/4-28 SAE-LT; Recommended tightening torque for grub screw:4 N·m; T:32.9 mm; Recommended diameter for attachment bolts, inch G:0.375 in; N4:2 mm; Basic static load rating C0:4.75 kN; Basic dynamic load rating C:9.56 kN; |
| 1 0289 06 Rollix Slewing Ring Bearings | Mass lock nut:60 kg; B:80 mm; d3:630 mm; Associated spanner:TMFN 500-600; G:Tr 500x5; d1:580 mm; Associated eyebolt for handling:M 10; B5:100 mm; B3:12 mm; d2:540 mm; b:40 mm; h:23 mm; |