| No. | Brand | F | J | N | H | k | B | e | S |
| UEFBL206-19MZ20RFCEB | AMI | - | - | 11mm | 33.3 mm | - | - | - | - |
| UKFS308+HE2308 | AMI | - | - | - | - | - | 34.8 mm | - | - |
| UEFBL205-15CW | AMI | - | - | 18mm | - | - | 51.6 mm | - | - |
| UCFB206-17NPMZ2RF | AMI | - | - | - | - | - | - | - | - |
| UEFK209 | AMI | - | - | - | - | - | - | - | - |
| UCFB206NP | AMI | - | 49 mm | M8 | 33.3 mm | - | - | - | - |
| UKFL319+HE2319 | AMI | - | - | - | - | - | - | 30 mm | 14.9 mm |
| UENFL209-28B | AMI | - | - | - | - | - | - | - | - |
| UENFL205CB | AMI | - | - | - | - | - | 24 mm | - | - |
| UKFS313+HA2313 | AMI | - | - | - | - | - | - | - | - |
| UENFL208CEW | AMI | - | - | - | - | - | - | - | - |
| UKFS311+H2311 | AMI | - | - | - | - | - | - | - | - |
| UENFL205-15CW | AMI | - | - | - | - | - | - | - | - |
| UKPX17+H2317 | AMI | - | - | - | - | - | - | - | - |
| UKP217+H2317 | AMI | - | - | - | - | - | - | - | - |
| UKPU306+HE2306 | AMI | - | - | - | - | - | - | - | - |
| UCNFL205-16MZ2RFCW | AMI | - | - | - | - | - | 30 mm | - | 8 mm |
| UCTBL205-14CEW | AMI | - | - | 16mm | - | - | 51.6 mm | - | - |
| KHPF206 | AMI | - | - | - | - | - | - | - | - |
| UCTBL207-20B | AMI | - | - | - | - | - | - | - | - |
| AMI UCNFL205-16MZ2RFCW Mounted Units & Inserts | d:31.75 mm; T min.:-40 °C; Z:29.5 mm; s1:15 mm; B:30 mm; S:8 mm; A1:12 mm; T max.:100 °C; C0:11.2 kN; A:33.5 mm; |
| AMI UENFL206-20MZ20RFB Mounted Units & Inserts | A:40 mm; Weight:0.95 kg; C:12.8 kN; T min.:-20 °C; N:13mm; B:34 mm; s1:30.5 mm; H1:15 mm; G:M6x1; N1:19 mm; |
| AMI KHLFL205-16NP Mounted Units & Inserts | RoHS:6; Category:Cam Followers; Thread Size on Cam Follower (M)(mm):M5; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):1340; Unit:Metric Series; B:6; Basic Load Rating Cor (Static)(kN):1400; |
| AMI UCNST210-30 Take Up Unit Bearings | A:40 mm; T min.:-20 °C; Recommended tightening torque for set screw:11.5 Nm; S:18.2 mm; B:36.4 mm; Z:70.5 mm; N1:22 mm; Designation of open end cover:SCOE206-30; G:R1/8"; B1:48.3 mm; |
| AMI UENFL206W Flange Block Bearings | Bearing Part Number:6207; Bearing I.D. d(mm):35; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Shape:Flange Type; Seals:VV (Non-Contact Rubb; |
| AMI UENFL206-20MZ20CW Mounted Units & Inserts | C0:15.2 kN; J:92 mm; d:33.34 mm; A1:12.5 mm; Weight:1.61 kg; T max.:100 °C; A:36 mm; Z:32 mm; s1:21.45 mm; e:21 mm; |
| AMI KHPFT204-12 Flange Block Bearings | Characteristic cage frequency, FTF:0.39 Hz; rs min:3 mm; da min:108 mm; Static load, C0:119 kN; B:45 mm; f0:13.3; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:4.2 Hz; Brand:NTN; Max operating temperature, Tmax:120 °C; |
| AMI UEFK209 Flange Block Bearings | Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Holder Surface Treatment:Clear Anodize; Shape:Flange Type; Type:Bearings with Housin; RoHS:6; Bearing Retained:Yes (with retaining; Volume Discount:Available; Flange O.D. H(φ):41; |
| AMI KHFT211 Flange Block Bearings | Characteristic outer ring frequency, BPF0:6.24 Hz; Nlim:9,900 rpm; Fatigue limit load, Cu:8.4 kN; Max operating temperature, Tmax:120 °C; d1:59 mm; Static load, C0:68.9 kN; Characteristic rolling element frequency, BSF:5.79 Hz; ra max:1 mm; Mass (without HJ ring):0.44 kg; da min:51.5 mm; |
| AMI UKFT205+H2305 Mounted Units & Inserts | d:20 mm; r:0.5; S:7 mm; T min.:-20 °C; C1:3.7 mm; SW:3 mm; B2:13.5 mm; T max.:100 °C; Recommended tightening torque for set screw:3.9 Nm; G:M6x1; |
| AMI UKFL312+H2312 Mounted Units & Inserts | B1:105 mm; Weight:17.64 kg; d1:145 mm; C:60 mm; T min.:-20 °C; C1:21 mm; d:100 mm; T max.:100 °C; D:240 mm; B2:21 mm; |
| AMI UCFA206NP Mounted Units & Inserts | Recommended tightening torque for set screw:3.7 Nm; A:29.3 mm; d:23.81 mm; C:14 kN; e:19 mm; G:R1/8"; C0:7.88 kN; Designation of housing:FLE205-; L:70 mm; T max.:100 °C; |
| AMI KHPFT201-8 Flange Block Bearings | Load Direction:Radial; Preload:Light Preload; Basic Dynamic Load Rating(N):12100; Special Configurations Code:No; Size Standards:Metric System; Specifications, Environment:Standard / For high; Outer Ring:With Outer Ring; Precision Grade Symbol:P4; Combination symbol:DB; |
| AMI UENST209-28 Mounted Units & Inserts | Days to Ship:7 Days; Seals:ZZ (Double Shield); Number of Bearings:Double; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):15; Flange O.D. H(φ):66; RoHS:6; Bearing Used:Deep Groove Ball Bea; Flange Shape:Compact Type; |
AMI UKFL309+H2309 Mounted Units & Inserts Video
Spherical Roller Bearings -- ISO 21310 KW33 bearing
Jun 8, 2021 — UKFL309+H2309, 40, NACHI, Bearing Units. NUP203E, 17, 40, 12, FAG, CYLINDRICAL ROLLER BEARINGS. 22308S.MB, 40, 90, 33, FAG, SPHERICAL ROLLER ...
AMI UKFL309+H2309 Mounted Units & Inserts - UKFL309+H2309 ...
AMI UKFL309+H2309 Mounted Units & Inserts, Units Mounted Units & Category and Housings CAD models , HUB CITY Brand Mounted Units & Inserts Manufacturing ...
AMI Bearings Inc. | UKFL309+H2309 | 40MM HEAVY WIDE ...
UKFL309+H2309. 40MM HEAVY WIDE ADAPTER 2-BOLT FLANGE SINGLE ROW BALL BEARING. Item #104304761. each. 0 Available to Order This item typically ships in 5-7 ...
AMI UKFL309+H2309 Mounted Units & Inserts - TIMKEN BEARING ...
AMI UKFL309+H2309 Mounted Units & InsertsTechnical information ; Basic static load rating (C0):, 1080 kN, (Grease) Lubrication Speed: 700 r/min, d: ; Brand: ISB ...
AMI UKFL309+H2309 Mounted Units & Inserts ... - NSK 6204 Bearing
QuestionAMI UKFL309+H2309 Mounted Units & Inserts ? Find what you FN Bearing Machinery Equipment Co.,Ltd 4.57 Y2 - Geometry Factor need faster 1100 rpm Oil ...
AMI UKFL309+H2309 Mounted Units & Inserts - PFG BEARING ...
AMI UKFL309+H2309 Mounted Units & Inserts ; Inner/Outer Ring Material: Steel ; Basic Load Rating, Static Rating(N):, 420000 ; Low Torque Specification: No ; Symbol ...