iso 12240 bearing

No.	Brand	s	H	A	L	B	D	U	d
492	iso	-	-	-	-	46 mm	130 mm	-	60 mm
5753	iso	-	-	-	-	23.8 mm	-	-	30 mm
15243	iso	-	192.484 mm	-	349.25 mm	-	-	-	-
din 12240	iso	-	-	-	-	36.50 mm	90.0000 mm	-	40.000 mm
ya100rr	timken	-	-	-	-	4.5938 in	3.6250 in	-	1.2500 in
16281	iso	-	-	-	-	-	-	-	-
15	iso	-	-	-	-	-	-	-	-
281	iso	25.4 mm	-	58.737 mm	136.525 mm	-	-	-	-
12240	iso	-	-	-	-	-	-	13 mm	-
din 281	iso	-	-	-	-	23 mm	120 mm	-	65 mm

iso 15243 bearing	H1:101.6 mm; H:192.484 mm; RG:3/8 NPT; Max. speed for Taconite seal:750 r/min; R2:27.781 mm; ba:40.481 mm; End plug (suffix Y):EPR 11; Taconite seal (db shaft position):TER 112; Mass pillow block:21.2 kg; L:349.25 mm;
iso 15 bearing	Ca:107.798 mm; PosiTrac Plus contact element (db shaft position):B10724-175; P90°:334 kN; Initial grease fill:2154.6 g; db:222.25 mm; A2:295.275 mm; Lock nut:AN 40; Eye bolt:2 x 3/8-16 UNC; RG:1 NPT; da:200 mm;
iso 492 bearing	Dynamic (Cr):3 mm; Pu:273 kN; with cylindrical bore:2 800 min-1; Static (Cor):5.5 mm; D:130 mm; B:46 mm; Oil:38.410 kN; with tapered bore:3 600 min-1; rs (min):2.1 mm; d:60 mm;
iso 281 bearing	Basic dynamic load rating C:77 kN; a:3.969 mm; s:25.4 mm; d2:68.659 mm; A:58.737 mm; L:136.525 mm; A1:76.994 mm; Limiting speed:4500 r/min; A5:29.369 mm; A6:19.05 mm;
iso 16281 bearing	Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0.05; Product Group:B00308;
iso 5753 bearing	d:30 mm; Pu:1.232 kN; ra:1 max; Weight:0.31 kg; B:23.8 mm; Oil:8 400 min-1; Bearing designation:3206 ; a:41 mm; Static (Cor):27.100 kN; Dynamic (Cr):30.998 kN;
iso din 12240 bearing	Sealed Speed Rating n3:5000 rpm; Grease Speed Rating n1:5000 rpm; Accessories:Shield & Seal; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:60500 N; D:90.0000 mm; d:40.000 mm; Basic Static Radial Load Rating Co:43000 N; B:36.50 mm;
timken ya100rr bearing	locking device:Set Screw; D:3.6250 in; bore type:Round; mounting type:Four-Bolt Flange; manufacturer upc number:4547359791129; B:4.5938 in; d:1.2500 in;
iso din 281 bearing	B:23 mm; da:72 min; Pu:1.819 kN; Grease:5 300 min-1; Oil:6 300 min-1; Weight:0.997 kg; rs:1.5 mm; d:65 mm; Static (Cor):40.011 kN; D:120 mm;

iso 12240 bearing Video

ISO 12240-2:1998 - Spherical plain bearings — Part 2 ... - ISO

ISO 12240-2:1998. Spherical plain bearings — Part 2: Angular contact radial spherical plain bearings. Buy this standard. This standard was last reviewed and

ISO 12240-4:1998/Cor 1:1999 - Spherical plain bearings ... - ISO

ISO 12240-4:1998/Cor 1:1999. Spherical plain bearings — Part 4: Spherical plain bearing rod ends — Technical Corrigendum 1

ISO 12240-1:1998(en), Spherical plain bearings — Part 1

— Part 4: Spherical plain bearing rod ends. 1 Scope. This part of ISO 12240 specifies dimension series, tolerances and radial internal clearances